> >>CL 1600

CL 1600

CL 1600 View larger

PRO AMPLIFIERS AUDIO

MODEL: CL 1600 AMPLIFIKATOR AUDIO 

DYNACORD 2 X 800W RMS 

  1. Kontakt: 0692088111
  2. Email: [email protected]

More details

Warning: Last items in stock!

153 000 Leke tax excl.

More info

Load Impedance
2 O, 4 O, 8 O
Max. Midband, Output Power, THD = 1%, 1kHz , Dual Channel
2 O - 1100W, 4 O - 800W, 8 O - 500W
Rated Output Power, THD < 0,1%, 20Hz … 20kHz
4 O - 700W, 8 O - 350W
Max. Single Channel, Output Power, Dynamic Headroom, IHF-A
2 O - 2200W, 4 O - 1200W, 8 O - 620W
Max. Single Channel, Output Power, Continuous, 1kHz
2 O - 1500W, 4 O - 950W, 8 O - 550W
Max. Bridged, Output Power, THD = 1%, 1kHz 4 O - 2200W, 8 O - 1600W
Maximum RMS Voltage Swing, THD = 1%, 1kHz72V
Power Bandwith, ref. 1kHz, THD =1%, half power @ 4 ohms 10Hz … 60kHz
Voltage Gain, ref. 1kHz 32,0 dB
Input Sensitivity, at rated output power
+4,7 dBu (1,33 V rms)
THD at rated output power, MBW = 80kHz, 1kHz < 0,05%
IMD-SMPTE, 60Hz, 7kHz < 0,02%
DIM 30, 3,15kHz, 15kHz < 0,01%
Maximum Input Level +22 dBu (9,76 V rms)
Crosstalk, ref. 1kHz, at rated output power < -80 dB
Frequency Response, ref. 1kHz (- 1dB) 15Hz … 40kHz
Input Impedance, active balanced 20 kO
Damping Factor, 1kHz > 300 Slew Rate 35 V/µs
Signal to Noise Ratio, Amplifier, A-weighted 107,0 dB
Output Noise, A-weighted < -70 dB
Output Stage Topology
Class H
Power Requirements
100V, 120V, 220V, 230V, 240 V; 50Hz … 60Hz (factory configured)
Power Consumption 1/8 max.
660W (Measured with 110% of reated mains voltage)
Protections
Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling
Front-to rear, 3-stage fans
Ambient Temperature Limits
+5°C ... +40°C (40°F ... 105°F)
Safety Class I
Dimensions (W x H x D) mm
483 x 88,1 x 386,8
Weight
16 kg